VSI

PRODUCT INTRODUCTION

The VSI series vertical impact crusher adopts a high-speed design and thin oil lubrication to ensure stable operation of the equipment. The new "N" series adopts a deep cavity rotor design with higher processing capacity. The sand making mode can increase the sand production rate by 10%. This series of products is widely used in the sand and gravel aggregate industry, which can produce both machine-made sand and high-quality aggregates through shaping.

MODEL AND TECHNICAL PARAMETER

Model	Capacity (t/h)		The max feeding size(mm)		Speed rpm	Double Motor Power(KW)	Weight(t)
Model	Waterfall Discharging And Central feeding	Full Center feeding	Soft stone	Hard stone	Speed rpm	Double Motor Power(KW)	Weight(t)
VSI7611	120-180	60-90	35	30	1700-1930	2*55	10
VSI7615N	150-280	70-140	35	30	1700-1930	2*75	8.6
VSI8518	200-260	100-130	40	35	1520-1690	2*90	12.5
VSI8522N	240-380	120-200	40	35	1500-1700	2*110	12
VSI9526	300-380	150-190	45	40	1360-1510	2*132	14.5
VSI9532N	350-400	180-280	45	40	1350-1510	2*160	17.5
VSI1140	450-520	225-260	50	45	1180-1300	2*200	19
VSI1145N	500-640	250-360	50	45	1100-1310	2*160	27.5
VSI1150N	450-545	344-368	55	45	1000-1300	2*250	20
VSI1263N	545-583	454-486	60	50	900-1200	2*315	23

GP series Roller crusher

GP

PRODUCT INTRODUCTION

The GP series roller crusher adopts a high-speed design and thin oil lubrication to ensure stable operation of the equipment. The new "N" series adopts a deep cavity rotor design, which has higher processing capacity. The sand making mode can increase the sand yield by 10%. This series of products is widely used in the sand and gravel aggregate industry, which can produce both machine-made sand and high-quality aggregates through shaping.

MODEL AND TECHNICAL PARAMETER

Model	Diameter(mm)	Width(mm)	Feeding size(mm)	Output size(mm)	Capacity (t/h)	Motor power(KW)	Weight(t)
2PGY400*250	400	250	<=25	0-5	2-10	5.5*2	1.3
2PGY450*500	450	500			5-15	11*2	3.5
2PGY610*400	610	400			8-20	15*2	3.8
2PGY750*500	750	500			10-30	22*2	6.5
2PGY800*600	800	600			15-35	30*2	9.5
2PGY800*800	800	800			20-50	37*2	11
2PGY1000*800	1000	800			50-80	55*2	15
2PGT1200*1000	1200	1000	<=30		80-100	90*2	25
2PGT1500*1000	1500	1000			150-200	132*2	32
2PGT1800*1000	1800	1000			200-300	250*2	45